A real job
- What we found
- Debris had built up in a sliding glass door track and the rollers had started to rust.
- What we did
- Removed the door, cleaned the track and replaced the rollers.
Doors, hardware and sliders in Box Elder and Weber counties
To The T Handyman Services repairs and installs doors in Brigham City and the towns around it. Doors that stick, sag or will not latch, sliding doors with dirty tracks or worn rollers, locksets and deadbolts, and new interior or exterior doors hung plumb and level. Send a photo of the door in its frame for a free estimate.
Free estimates
Get your free estimate

Why the fix is usually smaller
Almost every door that will not latch gets blamed on the latch, and very few of them are the latch. Most of the time the door has dropped or the opening has moved, and the fix is at the hinge or the strike.
The frame gets checked before the door, since the frame is the part that tends to move. Uneven gaps and rub marks point there long before a new latch set would.
Long screws driven into the framing behind the top hinge fix a surprising share of sagging doors in minutes.
Where a slab is warped through its thickness or a jamb has rot, we say so and price a replacement instead of chasing an adjustment.
When a door is past saving, the new one gets hung plumb and level so it closes with a click instead of a shove. Openings in older Box Elder and Weber County houses are rarely square, so the opening is checked before anything is ordered or cut.
A sagging door is one of the most common single items on a list, so door work tends to get booked alongside whatever else needs doing in that house. See Punch List & Honey-Do Repairs in Brigham City for how that works.

A real door job
A recent job was a sliding glass door. What we found: a build-up of debris in the track, and rollers that had started to rust. What we did: took the door out, cleaned the track, and replaced the rollers so it would run like new again.
That job is typical of door work in a lot of ways. The trouble was underneath the door, in the track and the rollers, and nothing about the glass or the frame needed replacing.
The door work we take on:
Most repairs are smaller than people expect: a hinge reset, a strike plate moved, a little planing, weatherstripping replaced. A door dropped and catching on the jamb, a latch no longer meeting its strike, and loose or stripped hinge screws are adjustments. A slab warped through its thickness gets replaced, and rot through a jamb or threshold gets the wood repaired along with it, which is our Rot Repair in Brigham City work.

Signs a door needs work
A door gives plenty of warning before it stops working. Almost all of these point at the hinge side or the frame rather than the handle, which is the opposite of where most people look first.
Have a job like this? Call (801) 390-3346 or send the details for a free estimate.
Uneven gaps and rub marks mean the door has dropped or the opening has shifted. That is an adjustment rather than a replacement in most cases, and it is worth checking before buying a new door.
How a door job runs
Show the door in its frame and, if you can, the gap at the top corners. That is usually enough for a ballpark.
On site the frame is checked before the door, and the hinges are tested. Long screws go into the framing where the top hinge has pulled.
The strike or the latch is moved to meet whichever way the fix runs, and the door is swung through its full arc as well as checked at the latch.
A warped slab or a rotted jamb gets priced as a replacement, and a new door is hung plumb and level with its hardware set.
Real reviews
Best handyman service I’ve ever used of all time! Him and his cousin came down to fix my floor that was starting to not look so well. They also changed my door! They were really professional and quick to reply! I would recommend To the T Handy man because they are really to the T
A real job
FAQs
Usually not. Most of the time the door or the frame has moved, and the fix is a hinge or strike-plate adjustment rather than a new latch set. It is a common one-visit repair.
Often, yes. On one recent slider, debris had built up in the track and the rollers had started to rust. The door came out, the track was cleaned and the rollers were replaced.
We have. The photo at the top of this page is a pet door set into an interior wall above a wood-look floor. Send a photo of the door or wall you have in mind and the size of the pet door, and we will say whether it fits.
Yes, storm and screen door installs are part of our door work. A photo of the opening and the door you plan to buy is enough to start.
Yes. We install interior and exterior doors, set them plumb, and handle weatherstripping and hardware. Older openings here are rarely square, so the opening gets checked before anything is ordered.
Usually. If daylight shows along one edge, the door has often dropped or the weatherstripping has worn out, or both. The door gets adjusted back into the opening first and the weatherstripping replaced after, so the seal meets a door that is actually sitting square.
Yes. Mechanical locksets, handles and deadbolts are part of a door job.
No. Anything that needs wiring or electrical work is outside our scope, and we say so before booking.
Yes. A job that runs under two hours carries a minimum, which gets confirmed before booking. We do not publish a figure, so a sticking door is a good item to pair with other repairs on your list.
Yes. Bi-fold closet doors, barn doors and sliding hardware are all door work we do. The opening is measured and checked first, since that decides what hardware fits.
Service areas
Door calls come from across the working radius out of Brigham City, and Ogden is a primary service area for us. A sagging door tends to be one line on a longer list, so it gets booked with whatever else is waiting in that house.
Get started
A shot of the door closed in its frame tells us most of what we need. We will come back with a ballpark, and estimates are free.
Mon to Fri 8:00 a.m. to 7:30 p.m., Sat 9:00 a.m. to 5:00 p.m. · Brigham City, UT · License No: 13021266-5501 (held by Precision Cut Construction LLC)